POSITIVE DOOR HOLDER.

DOOR ASSEMBLY - continued. - TM-10-5411-224-14_50

TM-10-5411-224-14 Lightweight Multipurpose Shelters (LMS) Model No. S-78B/G Type I and Type III & 5411-01-357-3683 Manual
Page Navigation
40

TM 10-5411-224-14 4-14. POSITIVE DOOR HOLDER. This task covers: a. Removal c. Test b. Installation d. Adjustment INITIAL SETUP Tools: Personnel Required: (2) General Mechanics Tool Kit (Item 1, Appendix B) Materials/Parts: Door Assembly Lockwasher (Item 20, Appendix E) Lockwasher (Item 21, Appendix E) Cotter Pin (Item 22, Appendix E) Shim (Item 23, Appendix E) Equipment Condition: Roller Latch Assembly removed (Para. 4-18) REMOVAL 1. At the shelter door (1), loosen strap (2) and remove ladder (3). 2. Remove two screws (8), lockwashers (9), and flatwashers (10) securing ground jumpers (11) to door (1). 3. Open shelter door (1). 4. Remove cotter pin (4) from chain and pin assembly (5) and remove pin from door stop bracket (6) and door brace (7). WARNING Door assembly weighs in excess of 50 pounds use two personnel to support door during removal or serious injury may result. CAUTION Door assembly weighs in excess of 50 pounds use two personnel to support door during removal to prevent damage to the door or shelter. 4-29

Privacy Statement
Press Release
Contact