TABLE 5-1. DIRECT SUPPORT TROUBLESHOOTING

SECTION III. DIRECT SUPPORT MAINTENANCE PROCEDURES - TM-10-5411-224-14_61

TM-10-5411-224-14 Lightweight Multipurpose Shelters (LMS) Model No. S-78B/G Type I and Type III & 5411-01-357-3683 Manual
Page Navigation
51

TM 10-5411-224-14 TABLE 5-1. DIRECT SUPPORT TROUBLESHOOTING - continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 5. GROUND JUMPERS NOT SECURED TO DOOR OR SHELTER. Step 1. Check to see if attaching hardware is loose or missing. Tighten hardware or replace ground jumpers as required (paragraph 5-14). 6. DOOR ASSEMBLY DOES NOT OPERATE PROPERLY. Step 1. Test door operation (open and close door several times). If door does not operate smoothly, lubricate in accordance with Lubrication Order, Appendix G. Step 2. Inspect door for loose or missing hardware or damaged hinge. Tighten hardware as required. If a hinge is damaged, notify your supervisor. 7. DOOR ASSEMBLY DOES NOT SEAL SECURELY. Step 1. Check RFI/EMI gasket for damage. Replace RFI/EMI gasket (paragraph 5-15). Step 2. Check environmental gasket for damage. Replace environmental gasket (paragraph 5-16). If door still does not close tightly, adjust in accordance with Chapter 4, paragraph 4-17. 5-3

Privacy Statement
Press Release
Contact