TM 10-5411-203-13
4-11.
EXTERIOR FRAME ASSEMBLY HEADER BAR MAINTENANCE INSTRUCTIONS (TYPE II ONLY) (CONT)
1.
Disconnect locking pins (1) that secure upright bars (2) to swivel feet (3) attached to ISO shelter.
2.
Disconnect locking pins (4) that secure upright bars (2) to header bar (5)
3.
Remove upright bars (2) from header bar (5).
4.
Remove header bar (5) from support straps (6) on connector assembly roof.
INSTALL
1.
Insert header bar (5) through support straps (6) on connector roof assembly.
2.
Connect upright bars (2) to header bar (5).
3.
Insert locking pins (4) into holes in upright bars (2).
4.
Insert locking pins (1) to secure upright bars (2) to swivel feet (3) attached to ISO shelter.
4-9
