STAIRWAY RISER AND SUPPORT ASSEMBLIES MAINTENANCE INSTRUCTIONS

RAMP THRESHOLD CHANNEL MAINTENANCE INSTRUCTIONS (TYPE II, CLASS A ONLY)

STAIRWAY PIN AND LANYARD ASSEMBLY MAINTENANCE INSTRUCTIONS

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
66

TM 10-5411-203-13 4-9. STAIRWAY RISER AND SUPPORT ASSEMBLIES MAINTENANCE INSTRUCTIONS (TYPE II, CLASS B ONLY) This task covers: Replace INITIAL SETUP: Parts/Materials Riser assembly, lower Riser assembly, middle Stair and riser assembly, upper Cross support assembly, rear Equipment Condition Stairway assembly removed from service. (Refer to para 2-4.) REMOVE 1. Remove retaining pins (1) from stairway components (2). 2. Separate stairway components (2) as required. INSTALL 1. Assemble stairway components (2) as required. 2. Insert retaining pins (1) to secure. NOTE FOLLOW-ON MAINTENANCE: If required, place stairway assembly in service. (Refer to para 2-5.) 4-6

Privacy Statement
Press Release
Contact