RAMP END PLATE ASSEMBLY MAINTENANCE INSTRUCTIONS (TYPE II, CLASS A ONLY) (CONT

RAMP END PLATE ASSEMBLY MAINTENANCE INSTRUCTIONS

RAMP THRESHOLD CHANNEL MAINTENANCE INSTRUCTIONS (TYPE II, CLASS A ONLY)

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
64

TM 10-5411-203-13 4-7. RAMP END PLATE ASSEMBLY MAINTENANCE INSTRUCTIONS (TYPE II, CLASS A ONLY) (CONT) 1. Turn ramp (1) over and lay flat on work surface. 2. Remove six screws (2) connecting threshold channel (3), ramp assembly hinge (4), and end plate assembly (5). INSTALL 1. Align holes in end plate assembly (3) with holes in ramp assembly hinge. (4) 2. Align holes in threshold channel (3) with holes in end plate assembly (3) and ramp assembly hinge (4). 3. Install six screws NOTE FOLLOW-ON MAINTENANCE: 1. Replace edge protector (refer to para 4- 6), and 2. If required, place ramp in service (refer para 2- 4). 4-4

Privacy Statement
Press Release
Contact