EXTERIOR FRAME PIN AND LANYARD ASSEMBLY MAINTENANCE INSTRUCTIONS (TYPE II ONLY)

EXTERIOR FRAME ASSEMBLY UPRIGHT BAR MAINTENANCE INSTRUCTIONS (TYPE II ONLY) (CONT)

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
72

TM 10-5411-203-13 4-13. EXTERIOR FRAME PIN AND LANYARD ASSEMBLY MAINTENANCE INSTRUCTIONS (TYPE II ONLY) This task covers: Replace INITIAL SETUP: Tools Drill, electric, portable (Appendix B, Section III, Item 3) Drill set, twist (Appendix B, Section III, Item 4) Stake, sheetmetal working (Appendix B, SectionIII, Item 8) Tool kit, general mechanic's (Appendix B, Section III, Item 1) Parts/Materials Pin and lanyard assembly Rivet, solid (Appendix D, Item 8) REMOVE WARNING Wear safety glasses while drilling out rivets. Failure to do so could result in serious eye injury. 1. Drill out rivet (1) connecting tab (2) to bar (3). 2. Remove any remaining portion of pin and lanyard assembly (4). INSTALL 1. Hold the tab (2) in place and install rivet (1) to secure to bar (3). 2. Check the holding strength of the replaced assembly (4). 4-12

Privacy Statement
Press Release
Contact