TM 10-5411-203-13
4-14. FRAME ASSEMBLY MAINTENANCE INSTRUCTIONS (CONT)
WARNING
Wear safety glasses while drilling out rivets. Failure to do so could result
in serious eye injury or blindness.
2.
Drill out all pop rivets (2) that secure retainer strips (1) and frame assembly (3) to connector assembly (4).
3.
Remove remaining pop rivet fragments (2).
4.
Remove retainer strips (1) and frame assembly (3).
INSTALL
NOTE
Ensure frame and connector are not assembled upside down.
1.
Hold frame assembly (1) against connector assembly (2) and align as shown. Be sure weather barrier (on
connector) and door pivot bushing (on frame) are on same end.
2.
Align retainer strips (3) with holes in frame (1).
3.
Using retainer strips (3) as guides, drill holes through connector assembly (2)
4.
Install new pop rivets (4) though holes in retainer strips (3), connector assembly (2), and frame assembly (1).
NOTE
FOLLOW-ON MAINTENANCE: If required, install Complexing Kit
Passageway. (Refer to para 2- 4.)
4-14
