TM 10-5411-203-13
2-4. INSTALLATION AND PREPARATION FOR USE (CONT)
a Installing Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter) (Cont)
(11)
Install bump thru doors using the following steps:
(a) Remove door (1) and pedestal assembly (2) from carrying container.
(b) Using flat-tip screwdriver, turn height adjustment screw (3) on pedestal assembly (2) counter-clockwise all
the way.
(c) Mount and hold pedestal assembly (2) on hinge pin (4).
NOTE
Doors should be mounted with blackout or privacy curtains facing inside shelter.
(d) Keeping height adjustment screw (3) and blackout curtains (5) facing inside the ISO shelter, insert pivot pin
6) into bushing in top of frame (7).
(e) Position pedestal assembly (2) so that hinge pin captive screws (8) align with threaded inserts in frame
assembly (7).
(f ) Thread captive screws but do not tighten.
(g) Repeat (a) thru (f) above for other door.
2-18
