TM 10-5411-203-13
2-4. INSTALLATION AND PREPARATION FOR USE (CONT)
b. Installing Complexing Kit Passageway - Type II, Class A and Class B (ISO Shelter to TEMPER) (Cont)
WARNING
The Complexing Kit Passageway components include two ramps and a
stairway. The ramps weigh approximately 145 pounds (65.77 kg) and
195 pounds (88.45 kg) respectively, and the stairs (complete assembly)
weighs ap- proximately 70 pounds (31.75 kg). Four per- sons are
required to handle each of these components. Attempting to lift or carry
any one of them by yourself could result in serious injury and/or damage
to equipment.
CAUTION
Do not permit ramp or stairway to drop. Sup- port ramp or stairway
throughout lowering process. Failure to do so may result in damage to
equipment.
(6) Remove ramp or stairway from shipping container.
(7) Place ramp or stairway inside ISO shelter or TEMPER for later placement.
2-22
