CORNER POST AND ISO FITTING ASSEMBLY REPLACEMENT AND REPAIR (cont)

CORNER POST AND ISO FITTING ASSEMBLY REPLACEMENT AND REPAIR (cont) - TM-10-5411-200-14_291

CORNER POST AND ISO FITTING ASSEMBLY REPLACEMENT AND REPAIR (cont) - TM-10-5411-200-14_293

TM-10-5411-200-14
Page Navigation
272

TM 10-5411-200-14 T.O. 35E4-177-1 5-5. (cont) 3. Inspect for and replace if necessary. a. Missing or damaged components b. Corrosion or paint damage. REPAIR Corrosion or paint damage. (Refer to paragraph 4-43) ASSEMBLY 1. 2. 3. 4. 5. 6. Position door holder (20) and install washers (19), lockwashers (18) and screws (17). Position light bracket (16) and install rivets (15). (Refer to 4-32.) Position roller assembly (14) against corner post and support cable and install screws (13). Position latch cam (12) and install washers (10), spring washers (11), and handle (9). Compress spring washers (11) and install pin (8), washer (7), and cotter pin (6). Position jack support fitting (5) and install screws (4). INSTALLATION 1. Position and support corner post (1) on upper and lower ISO fitting (3) and install bolts (2). 2. Install roof panel in accordance with paragraph 5-4. 5-13

Privacy Statement
Press Release
Contact