TM 10-5411-200-14
T.O. 35E4-177-1
6-2.
(cont)
1.
2.
3.
4.
5.
6.
Remove hinged floor in accordance
with paragraph 4-23.
Remove bolts (1) securing corner
posts (2) to lower ISO fittings
(3) .
Remove bolts (4), lockwashers (5),
and washers (6) securing fixed
personnel endwall to floor.
Remove screws (7), lockwashers (8),
and washers (9) securing reinforce-
ment angles (10) to floor.
Remove bolts (11), lockwashers (12),
and washers (13) securing fixed
cargo endwall to floor.
Remove screws (14) and lockwashers (15)
securing shear plate (16) and shim
(17) to floor.
Methyle
be used
or open
W A R N I N G
thylketone is flammable and toxic and shall
in a well-ventilated area away from sparks
flame.
Gloves should be worn during use.
7.
Apply solvent to sealed interface areas
of floor with fixed sidewall and endwalls.
8.
Secure web straps around shelter body.
9.
Attach lifting sling to upper ISO fittings.
10.
Lift shelter body away from fixed floor and set in level position on
blocks.
11.
Drill out rivets (18) and remove hinge (19).
(Refer to paragraph 4-32)
6-2
