TM 10-5411-200-14T.O. 35E4-177-15-5.(cent)2.Remove hinged endwalls inaccordance with paragraph 4-21.3.Remove hinged roof panels inaccordance with paragraph 4-20.4.Remove hinged floor panels in5.6.7.8.accordance with paragraph 4-23.Remove personnel door end endwall panel in accordance with paragraph4-25.Remove cargo door end endwall panel in accordance with paragraph4-26.Remove roof panel in accordancewith paragraph 5-4.Support corner post (1) and removebolts (2) securing post to upperand lower ISO fittings (3).DISASSEMBLY1.2.3.4.5.6.Remove screws (4) and remove jacksupport fitting (5).Remove cotter pin (6), washer (7),and pin (8) and remove handle (9).Remove washers (10), spring washers(11), and latch cam (12).Remove screws (13) and remove rollerassembly (14).Drill out rivets (15) and removelight bracket (16).(Refer to paragraph 4-32)Remove screws (17), lockwashers (18),and washers (19) and remove doorholder (20).CLEANING, INSPECTION 1.Clean post and component surfaces.2.Inspect mounting surfaces for corrosion and damage.5-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business