TM 10-5410-284-13&PTM 10602A-13&PLIGHTWEIGHT MAINTENANCE ENCLOSURE (LME)0005 00OPERATION UNDER USUAL CONDITIONS0005 00-6F abric Panel Installation. To lace the fabric panels together and place them on the frame proceed asfollows:Place two intermediate fabric panels (1) on the ground as shown. Lace the two panels together using thebecket lacing method (2). This procedure requires alignment of the sewn-in grommets (3) in one fabricpanel, with the sewn-in becket laces (4) in the fabric panel to be joined. Beginning at the ridge (1), center large grommet, pull the first becket lace (2) through the alignedgrommet (3). Then, grasp the second becket lace (4) and thread it through the grommet (5) and loop ofthe first becket lace (2), pulling it tight toward the eave (6). Grasp the third becket lace (7) and thread itthrough the aligned grommet (8) and the loop (9) of the second becket lace (4) pulling it tight toward theeave (6). Continue this procedure until the eave (6) is reached. As the lacing progresses, close the hookand pile wind flap (10).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
