TM 10-5410-284-13&P
TM 10602A-13&P
LIGHTWEIGHT MAINTENANCE ENCLOSURE (LME)
0005 00
OPERATION UNDER USUAL CONDITIONS
0005 00-8
Gather personnel and, on command, lift the fabric assembly and carry it into position over the ridge (1),
stepping carefully through the frame (2), place the ridge grommets (3) over the ridge posts (4).Secure
with hitch clip pins (5) attached to fabric assembly.
Unroll the fabric uniformly toward the eaves until the eave grommets align with the eave posts. Pull the
fabric away from the eaves to avoid pinching the fabric.Secure with hitch clip pins attached to fabric
assembly.
Place one End Fabric Panel near the end of the structure.
Remove the hitch clip pins (1) on the end arch assemblies. Lift the Intermediate Fabric Panel center
grommet (2) off the ridge post (3). Place the End Fabric Panel center grommet (4) over the ridge post
(3). Replace the Intermediate Fabric Panel center grommet (2) over the ridge post . Secure with the hitch
clip pin (1). Repeat the procedure at both eaves. Begin lacing the End Fabric Panel to the Intermediate
Fabric Panel, starting at the ridge and proceeding toward the eaves, closing the weatherseal flap (5) as
the lacing progresses. Repeat the procedure at the other end of the structure (6).
