TM 10-5410-284-13&P
TM 10602A-13&P
LIGHTWEIGHT MAINTENANCE ENCLOSURE (LME)
0005 00
OPERATION UNDER USUAL CONDITIONS
0005 00-2
WARNING
ASSEMBLY AND PREPARATION FOR USE
In preparation for assembly, place the frame and fabric transport covers near the selected site. The initial
task in erecting the LME is to assemble the frame and fabric components for concurrent assembly.
The frame hinge joints can pinch or crush hands or fingers. Use care
when placing hands near these joints. Be careful when carrying
components near other personnel.
CAUTION
Do not twist or turn frame components when handling. Damage to
equipment may result.
Frame Assembly. To assemble the frame proceed as follows:
Place one upper arch assembly (1), two lower arch assemblies (2) and one door header assembly (3) in
position as shown. Lock the upper arch assembly (1) into position using the attached quick release pin
(4). Insert the tongue (5) of one lower arch assembly (2) into the leg (6) of the upper arch assembly (1)
and lock it in place with the attached quick release pin (7). Now unfold the lower arch assembly (2) but do
not lock into position at this time. Repeat this procedure for the other leg (8).
