TM 10-5410-230-13
2-8. REMOVING THE RIGID WALL SHELTER BOOT WALL TYPE II.
a. Open roll-up door (1) and secure with straps (2).
b. Untie antenna sleeve tie tapes (3) and disconnect whip antennaes (4) from their mounts (5) on Rigid Wall Shelter
(RWS) (6).
c. If used, remove stakes (7) and loops (8) from foot loops (9) on both sides of Boot Wall.
d. Unthread belly band webbing (10) by lifting dee ring tab (11).
e. Separate hook and pile fastener tapes (12) on driver's side of boot assembly (13).
f. Holding frame (14) securely, remove locking pins (15) from swivel feet (16) and lower frame (14).
g. Lift boot assembly (13) up and over antenna mounts (5) and remove from RWS (6).
2-26
