TM 10-5410-230-13
g. Remove frame (1) from boot assembly (2) by opening header flaps (3).
h. Disassemble frame by removing locking pins (4) and separating upright bars (5) from header bar (1).
NOTE
Swivel feet may be left on RWS for future use, but should be removed and packaged
with boot wall when boot wall is to be permanently separated from RWS.
i. Remove two swivel feet (6) from RWS by loosening captive screw (7). Stow swivel feet (6) with upright bars (5).
2-27
