REMOVING THIE M577 BOOT WALL TYPE L (cont)

REMOVING THE RIGID WALL SHELTER BOOT WALL TYPE II.

TM-10-5410-230-13 Standard Integrated Command Post Systems Bootwalls Types I II & IV Classes 1 (Green) and 2 (Tan) Manual
Page Navigation
31

TM 10-5410-230-13 d. Loosen wing nuts (1) securing hold down track (2) along sides of the M577 (3). Remove hem (4) from hold down track (2) and tighten wing nuts (1). e. Unfasten straps (5) securing upper hem (6) of Boot Wall to loops (7). f. Loosen bolts (1) securing hold down track (2) to top of the M577 (3). Remove hem (4) of Boot Wall (5) and tighten bolts (1). g. If antenna (6) is present, remove antenna (6) from sleeve (7). h. Remove Boot Wall (5) by releasing all quick disconnect (8) and hook and pile fasteners (9). Start from lower sides and work upwards and then in towards center. i. Fold Boot Wall with the identification label visible and stow. NOTE If MCPS tent is to remain in service, install wall unit in accordance with TM 10-5410-229-13&P. 2-25

Privacy Statement
Press Release
Contact