REMOVING THE S-250E BOOT WALL TYPE IV

REMOVING TIE RIGID WALL SHELTER BOOT WALL TYPE II (CONT)

REMOVING TEE S-250E BOOT WALL TYPE IV (CONT

TM-10-5410-230-13 Standard Integrated Command Post Systems Bootwalls Types I II & IV Classes 1 (Green) and 2 (Tan) Manual
Page Navigation
35

TM 10-5410-230-13 2-9. REMOVING THE S-250E BOOT WALL TYPE IV. a. Release guy lines (1) on each side of Boot Wall and pull out tent stakes (2) if possible. b. Collapse telescopic poles (3) by raising upper portion of pole (3) slightly, holding locks (4), then lower pole completely. c. Remove each pole (3) from three loops (5) on side of Boot Wall. d. Separate hook and pile fastener tapes (6) on upper and lower portions of blackout wall (7). e. Release buckle (8) and remove bottom panel assembly (9) from cradle (10). Release shock cords (11) from HMMVW frame. f. Untie tie tapes, raise tailgate (12), and remove remove tailgate chains (13) from sleeves (14). Close and secure tailgate. 2-29

Privacy Statement
Press Release
Contact