TM 10-5410-224-14
(1) Sand damage area with sand paper to
(4) Fill in damaged area with epoxy, using
remove all traces of paint.
spatula or putty knife. Allow epoxy to cure fully.
(5) Sand surface of the cured epoxy to conform
Methylethyl ketone is flammable and toxic
to surrounding area.
and must be used only in a well-ventilated
(6) Paint repaired area in accordance with
area away from all sparks or open flames.
(2) Wipe surface with a cloth dampened in
c. Repairing Minor Panel Damage Where Face
methylethyl ketone and immediately wipe solvent
Sheet Is Surrounded By Extended Cracks. (See
from surface with a clean, dry cloth.
(3) Mix a small quantity of epoxy filler.
repairing small dents or gouges in the panel face