TM 9-4931-374-13&P
3-44. 120/208V CABLE ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
23
GLAND NUT (3). (cont)
NOTE
b. Tighten to a torque level of 35 to 40 lb-ft
The following procedures
(47.25 to 54 N-m).
pertain to assembly of the
electrical
plug
connector
c. Retorque
to
same
level
after
(female).
approximately 12 hours.
24
BAND (20). Slip on cable (1).
26
GLAND NUT (3). Slip on cable (1).
27
GRIP (4). Slip on cable (1).
28
GLAND (5). Slip on cable (1).
29
SPACER (6). Slip on cable (1).
25
CABLE (1).
30
REAR CONNECTOR HOUSING (7). Slip
on cable (1).
a. Cut both ends square.
b. Remove outer jacket (2) to 4.25 in.
(10.80 cm) from each end.
3-338
