TM 9-4931-374-13&P
8
CONTACT PIN (G) (9).
a. Slip onto twisted ends of four green wires (8).
b. Solder in place using solder (item 18, app D).
9
WHITE WIRE (10).
a. Cut carefully to allow wire to protrude 3.25 in. (8.26 cm) from outer
jacket (2).
b. Remove 0.75 in. (1.91 cm) of insulation from end of wire.
c. Twist end.
10
BUSHING (11).
a. Slip onto white wire (10).
b. Solder in place using solder (item 18, app D).
11
CONTACT PIN (N) (12).
a. Slip on bushing (11) attached to white wire (10).
b. Solder in place using solder (item 18, app D).
3-335
