TM 9-4931-374-13&P
4
CABLE (4).
a. Repair, if possible, damaged insulation or wires by shortening slightly.
b. Replace with a 100-ft (30.48-m) long piece of cable (fig. 29, app E) if not
repairable.
5
TWO GLANDS (5). Replace if deformed or deteriorated.
6
TWO GRIPS (6). Replace if broken.
7
TWO DUST COVERS (7). Replace if bent or broken.
8
BAND (8).
a. Clearly mark any hard to read parts with black letters 0.31-in. (0.79-
cm) high, using marking ink (item 13, app D), to read as follows:
CABLE ASSEMBLY PART NO. 72289-100
b. If unable to repair, replace with a new fabricated item (fig. 30, app E).
REASSEMBLY
1
CABLE (1).
NOTE
a. Cut both ends square.
The following procedures
b. Remove outer jacket (2) to 4.25 in.
pertain to assembly of the
(10.80 cm) from each end.
electrical
plug
connector
(male).
3-333
