TM 9-4931-374-13&P
3-44. 120/208V CABLE ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
NOTE
Step 12 pertains to three wires which are black, red, and
blue or orange in color.
12
THREE WIRES (13).
a. Cut carefully to allow wires to protrude 3.25 in. (8.26 cm) from outer
jacket (2).
b. Remove 0.75 in. (1.91 cm) of insulation from end of wires.
c. Twist ends.
13
THREE BUSHINGS (11).
a. Slip onto three wires (13).
b. Solder in place using solder (item 18,
app D).
14
THREE CONTACT PINS (A, B, AND C)
(14).
a. Slip on three bushings (11) attached to
three wires (13).
15
CONTACT PIN (G) (9), CONTACT PIN
b. Solder in place using solder (item 18,
(N) (12), AND THREE CONTACT PINS
app D).
(A, B, AND C) (14). Install in pin socket
(15) according to information in table 3-9.
3-336
