TM 9-4931-374-13&P
Table 3-9. Wire Positioning
on Connector
16
PIN SOCKET (15).
Slide into rear
connector housing (7).
NOTE
Use the following information
17
PREFORMED PACKING (16). Install.
to obtain correct wire polarity.
18
FORWARD
CONNECTOR
HOUSING
(17). Install.
Wire color
Designation on socket
19
EYELET OF DUST COVER (18) AND
SCREW (19). Assemble.
Black
A
Red
B
Blue or Orange
C
White
N
Green
G
22
GRIP (4). Push together.
CAUTION
Gland nut has left-hand
threads
and
should
be
tightened by turning in the
opposite direction from that
used to tighten standard
right-hand threaded nuts.
20
THREE SCREWS (19). Install.
23
GLAND NUT (3).
21
SPACER (6) AND GLAND (5). Slide into
a. Slide toward rear connector housing (7).
position at end of rear connector housing
(7).
3-337
