TM 9-4931-374-13&P
40
THREE SCREWS (26). Install.
41
SPACER (6) AND GLAND (5). Slide into
CAUTION
position at end of rear connector housing
Gland nut has left-hand
(7).
threads
and
should
be
tightened by turning in the
42
GRIP (4). Push together.
opposite direction from that
used to tighten standard
right-hand threaded nuts.
43
GLAND NUT (3).
a. Slide toward rear connector housing (7).
b. Tighten to a torque level of 35 to 40 lb-ft (47.25 to 54 N.m).
c. Retorque to same level after approximately 12 hours.
3-341
