TM 9-4931-374-13&P
DISASSEMBLY
NOTE
Lug terminals should be removed
only when necessary to replace
defective parts.
1
FIVE LUG TERMINALS (1). Remove by cutting
from three green wires (2).
2
THREE LUG TERMINALS (3).
Remove by
cutting from three blue wires (4).
REPAIR
NOTE
Each individual wire section
1
TEN WIRE SECTIONS (1).
Repair by
may be repaired if possible, or
fabrication (fig. 3, app E).
replaced by a like item. Refer
to wire table, page 3-74.
2
FIVE LUG TERMINALS (2) AND THREE
For initial installation of
LUG TERMINALS (3).
Repair by
harness
assembly
or
replacement (app C).
replacement
of
complete
harness assembly, refer to
reassembly procedure on
page 3-46, paragraph 3-10, for
electrical installation.
3-229
