TM 9-4931-374-13&P
REMOVAL
INSPECTION
For removal procedures for the harness
assembly, refer to disassembly procedure on
ALL WIRES.
page 3-46, paragraph 3-10, for electrical
installation.
a. Check for breaks, corrosion, and worn
or deteriorated insulation.
b. Check for
with
suitable
DISASSEMBLY
1
ELEVEN WIRES (1). Separate.
NOTE
Remove lug terminals only when necessary
to replace defective parts.
2
THREE LUG TERMINALS (2) ON BLUE WIRE NO. 20
(3), WHITE WIRE NO. 21 (4), AND GREEN WIRE NO.
22 (5). Remove by cutting.
3-225
