TM 9-4931-374-13&P
3-26. WIRING HARNESS ASSEMBLY (BENCH)--MAINTENANCE INSTRUCTIONS (cont)
REPAIR
REASSEMBLY
NOTE
1
ELEVEN WIRES (1).
Replace
by
Steps 1 and 2 are necessary
fabrication (fig. 3, app E).
only when wires or lug
terminals are replaced or at
2
THREE LUG TERMINALS (2). Repair by
initial installation.
replacement (app C).
1
ELEVEN WIRES (1). Strip insulation (2) back 0.50 in.
(1.27 cm) at each end.
2
THREE LUG TERMINALS (3).
a. Install on blue wire no. 20 (4), white wire no. 21 (5),
and green wire no. 22 (6), one on each wire.
b. Install by crimping.
3-226
