TM 9-4931-374-13&P
REPAIR
REASSEMBLY
1
TWO BRACKET ASSEMBLIES (1). If
missing or damaged, replace with new
items.
2
EIGHT BLIND NUTS (2). Replace with
new items if removed.
3
TWO BRACKETS (3).
If damaged
replace with two new bracket assemblies
(1).
EIGHT BLIND NUTS (1).
a. Install in two brackets (2).
4
FOUR SCREWS (4). Replace if missing,
damaged, or corroded.
b. Set in place using hydraulic gun.
MODIFICATION OF SHELVING ASSEMBLY
NOTE
The following procedure
is used only for initial
installation or when the
shelving assembly has
been replaced with a new
unit.
LOWER SHELF (1). Drill four 0.281in. (0.714-cm)
diameter holes (2) through lower shelf (1) as illustrated.
3-221
