TM 9-4931-374-13&P
3-9. SHOP SET--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
NOTE
7
TWO BLIND NUTS (11).
All airhoses may now be
a. Install in table support (12) from
connected to the coupling
above.
assemblies.
b. Pull up tight using hydraulic gun.
Steps 7 thru 12 list parts used
to secure the modified tool
cabinet in place at cargo door
end of left table.
8
ANGLE (13), TWO FLAT WASHERS (14), TWO LOCKWASHERS
(15), AND TWO SCREWS (16). Install on table support (12).
9
TWO FLAT WASHERS (17), TWO LOCKWASHERS (18), AND TWO
SCREWS (19). Install to hold modified tool cabinet (20) to angle (13).
3-44
