TM 9-4931-374-13&P
5
ANGLE (10), TWO FLAT WASHERS (11), TWO LOCKWASHERS
(12), AND TWO SCREWS (13). Install on modified tool cabinet (1).
6
TABLE SUPPORT (14). Mark two hole locations 12 in. (30.48 cm)
apart (centered on table support), using existing holes in angle (10) as
a template.
7
TWO SCREWS (13), TWO LOCKWASHERS (12), TWO FLAT
WASHERS (11), AND ANGLE (10). Remove and separate.
8
TWO
SCREWS
(9),
TWO
LOCKWASHERS (8), AND TWO FLAT
WASHERS (7). Remove and separate.
9
TWO
SCREWS
(6),
TWO
LOCKWASHERS (5), AND TWO FLAT
WASHERS (4). Remove and separate.
10
BRACE (3). Remove.
11
MODIFIED TOOL CABINET (1). Remove.
3-41
