TM 9-4931-374-13&P
3-9. SHOP SET--MAINTENANCE INSTRUCTIONS (cont)
INSTALLATION OF BLIND NUTS (cont)
13
TWO BLIND NUTS (15).
a. Install in table support (14) from
above.
b. Pull up tight using hydraulic gun.
12
TABLE SUPPORT (14). Drill two 0.413-in.
(1.049-cm) +0.005 in. (-0.0127 cm)
diameter holes through at marked
locations.
REASSEMBLY
1
WARNING PLATE (1).
WARNING
Dry cleaning solvent is flammable and should not be
used near an open flame or in a smoking area. Use only
in well-ventilated areas. Avoid skin contact as the
solvent evaporates quickly and has a drying, sometimes
damaging, effect on skin.
a. Before installing new plate, clean area with dry cleaning solvent
(item 6, app D) wearing gloves (item 9, app D).
b. Remove protective backing.
c. Apply to outside shelter wall just above existing data plate (2)
to left of personnel door (3).
3-42
