TM 9-4931-374-13&P
NOTE
Steps 2 thru 6 pertain to
2
SHELTER PAN (4). Drill a 1.04in. (2.64-
reassembly
of
airhose
an) +O.01-in. (+0.023cm) diameter hole
connections on the inside and
through, 5.50 in. (13.97 cm) to left of right
outside of the shelter wall to
edge and 5.50 in. (13.97 cm) down from
left of personnel door (as
top edge (viewed from outside).
viewed from outside).
Step 2 is performed only
once at the time of initial
installation.
3
BULKHEAD ADAPTER (5).
a. Remove nut (6) from body (7).
b. Install body (7) through shelter pan (4) adjacent to personnel
door.
c. Tighten nut (6) on body (7).
4
TWO ELBOWS (8). Install.
5
FEMALE COUPLING ASSEMBLY (9). Install on inside of shelter.
6
MALE COUPLING ASSEMBLY (10). Install on outside of shelter.
3-43
