TM 9-2330-390-14&P
4-122. FUEL LINES REPLACEMENT
This Task Covers:
a.
Fuel Hose Replacement
c.
Overflow Hose Replacement
b.
Injection Pipe Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
Negative (-) ground cable disconnected from battery
(see paragraph 4-45).
Rags (Item 25, Appendix F)
Tools/Test Equipment:
General Safety Instructions:
General mechanic’s tool kit (Item 30, Appendix G)
DO NOT perform this procedure near fire, flames, or
sparks.
Diesel fuel is combustible. DO NOT smoke or allow an open flame near fuel tank. Shut
down engine when adding fuel. Failure to follow this warning will result In serious injury
or death to personnel. If you are burned, immediately seek medical attention.
DO NOT allow dirt or dust to enter fuel tank. Damage to engine fuel system will result.
NOTE
Use rags as required to clean any fuel spills.
1.
Drain fuel tank (see paragraph 4-125).
2.
Slide back clip (5) and disconnect fuel hose (6) from joint (3) at injection pump (4).
3.
Remove fuel filter (1) with fuel hose (6) from fuel tank (2).
4.
Slide back clip (7) and remove fuel hose (6) from fuel filter (1).
4-352
