TM 9-2330-390-14&P
4-120. INJECTION PUMP REPLACEMENT (Con't).
1.
2.
3.
4.
NOTE
Assistance is required to check timing.
Install injection pipe (8). Leave end at nozzle
holder (9) disconnected (see paragraph 4-122).
Install fuel tank and fill (see paragraph 4-125).
Remove spiral case (see paragraph 4-128).
Set engine speed control lever to HIGH START
(see paragraph 2-20).
5.
Turn flywheel (10) clockwise to check for fuel
leaking from tip of injection pipe (8).
6.
7.
Slowly turn flywheel (10) clockwise. Immediately
stop when fuel flow at tip of injection pipe (8) in-
creases.
Check timing marks on cylinder fins (12) and fly-
wheel (10). Timing mark (11) on cylinderfins must
be alined with timing mark F (13) on flywheel.
4-348
