TM 9-2330-390-14&P
4-47. FRONT DOLLY MARKER CLEARANCE LIGHT CABLE ASSEMBLIES
REPLACEMENT.
This Task Covers:
a.
Removal
b. installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
intervehicular cable disconnected from towing
Marker tags (item 28, Appendix F)
vehicle (see paragraph 2-7).
Tie-down straps
Tools/Test Equipment:
General mechanics tool kit (item 30, Appendix G)
Two locknuts
Two lockwashers
NOTE
All wires should be tagged before removal. Refer to paragraph 4-18 for tagging
Instructions.
Refer to electrical wiring dilagrams for assistance (see paragraph 4-50).
1.
On right side, cut tie-down straps from connector plugs (10 and 11). Disconnect cable assembly connector
plug (11) from marker clearance light connector plug (10). Discard tie-down straps.
2.
Remove two screws (8) and lens housing (7) from marker clearance light body (9).
4-89