TM 9-2330-390-14&P
4-46.
SIGNAL CONDITIONING BOX-TO-FORWARD JUNCTION BOX CABLE ASSEMBLY
REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Intervehicular cable disconnected from signal condi-
tioning box (see paragraph 2-7).
• Marker tags (item 26, Appendix F)
• Intradolly cable disconnected from forward junction
• Tie-down straps
box (see paragraph 2-7).
Tools/Test Equipment:
• General mechanic’s tool kit (item 30, Appendix G)
NOTE
• All wires should be tagged before removal. Refer to paragraph 4-18 for tagging
Instructions.
• Refer to electrical wiring diagrams for assistance (see paragraph 4-50).
• Remove tie-down straps as required. Ensure that new tie-down straps are used
during installation.
1.
Loosen three screws (1) and open cover (4) of forward junction box (6).
2.
Remove seven screws (9) and cable assembly wires (2) from positions 1 through 6 and 8 of terminal block (8).
4-84
