TM 9-2330-390-14&P
4-46.
SIGNAL CONDITIONING BOX-TO-FORWARD JUNCTION BOX CABLE ASSEMBLY
REPLACEMENT (Con’t).
14.
Close cover (4) of forward junction box (6) and
tighten three screws (1).
13.
Install seven cable assembly wires (2) on posi-
tions 1 through 6 and 8 of terminal block (8) with
screws (9).
12.
Install green ground wire (3) on top right screw (5)
with nut (7).
Follow-on Tasks:
• Connect intradolly cable to forward junction box and rear junction box (see paragraph 2-11).
• Connect intervehicular cable to signal conditioning box and towing vehicle (see paragraph 2-11).
• Check operation of lights.
4-88
