HYDRAULIC CYLINDER BOOT REPLACEMENT

Section XV. PREPARATION FOR STORAGE OR SHIPMENT - TM-9-2330-275-14P_347

TM-9-2330-275-14P Trailer Tank Water: 400 Gallon 1-1/2 Ton M149 (NSN 2330-00-542-2039) M149A1 (NSN 2330-00-832-8801) M149A2 (2330-01-108-7367) Manual
Page Navigation
332

TM 9-2330-275-14&P 4-87. HYDRAULIC CYLINDER BOOT REPLACEMENT (M832 SN J089-001 THRU 159 AND J017-160 THRU 350 ONLY) (Con’t). 3. Compress hydraulic cylinder (6) until top clamp (9) on boot (8) is accessible. 4. Remove two clamps (7 and 9) securing boot (8) to hydraulic cylinder (6). 5. Remove boot (8) from hydraulic cylinder (6). Discard boot (8). NOTE Make sure boot is pulled down until it completely covers outer cylinder. 1. Install new boot (8) on hydraulic cylinder (6). CAUTION 2. 3. Make sure hydraulic cylinder boot clamps are positioned so clamp screws face the lock struts. If clamps are not properly positioned, clamp screws could be damaged. Secure new boot (8) to hydraulic cylinder (6) with two clamps (7 and 9). Install straight pin (3) and two washers (5) and new cotter pins (4) in hydraulic cylinder (6) and suspension bar (2). 4-242

Privacy Statement
Press Release
Contact