TM 9-2330-275-14&P
4-86. HYDRAULIC CYLINDER REPLACEMENT (M832 AND M840) (Con’t).
NOTE
Note position of fittings for installation purposes.
15.
Remove adapter (25), lifting-leveling jack valve (26), elbow (27), and adapter (28) from hydraulic cylinder (29).
NOTE
l Perform steps 1 through 5 for the M840.
l Perform steps 6 through 12 for the M832.
1.
Install adapter (28), elbow (27), lifting-leveling jack valve (26), and adapter (25) on hydraulic cylinder (29).
2.
Install hydraulic cylinder (29) on dolly with pin (33), washer (34), and new cotter pin (35).
3.
Install lower end of hydraulic cylinder (29) on dolly with pin (30), two washers (31), and new cotter pin (36).
4.
Connect hydraulic hose (32) to adapter (25).
5.
Rotate hydraulic pump (24) release valve handle (23) clockwise to PUMP position.
4-239
