TM 9-2330-275-14&P
4-68. REAR AXLE YOKE AND MOUNTING BRACKET MAINTENANCE (M832 SN J089-001
THRU 159 AND J017-160 THRU 350 ONLY) (Con’t).
b.
lNSPECTION
Inspect mounting bracket, rear yoke, trunnion bearings, suspension bar, stabilizer bar, and all other removed
parts for excessive wear, tears, breaks, cracks, and bends. Replace damaged hardware.
c.
INSTALLATION
1.
Install two new sleeve bearings (11) in mounting bracket (1).
2.
Position two flat washers (12) between mounting bracket (1) and front yoke (10).
3.
Position tube spacer (13) on mounting bracket (1) and front yoke (10).
4.
Install new threaded rod (8) through mounting bracket (1) and front yoke (10), ensuring proper alinement.
5.
Install two flat washers (6) and new locknuts (7) on ends of threaded rod (8). Make sure equal amounts of
thread are exposed on each end of threaded rod (8) after tightening locknuts (7).
4-183
