TM 9-2330-275-14&P
4-87. FRONT STABILIZER BAR REPLACEMENT (M832) (Con’t).
.
b.
INSTALLATION
NOTE
Perform the following steps at left and right sides of front dolly to install front
stabilizer bar.
1.
Install rod (6), tube (5), and three bushings (2) on mounting bracket (1) with three washers (3) and new locknut
(4).
2.
Install front stabilizer bar (7) on rod (6) with bushing (8), washer (9), and new locknut (10).
3.
Install front stabilizer bar (7) on front dolly with retaining strap (16), rubber bushing (17), mounting bracket (15),
and four washers (14), new lockwashers (13), and screws (12). Install new nonelectrical wire (11) on four
screws (12).
4-180
