TM 9-2330-275-14&P
4-65. ALINING ROD REPLACEMENT (Con’t).
NOTE
All models are similar.
Replacement of front and rear alining rods is the same. Replacement of
alining rods on front dolly is shown.
1.
2.
3.
4.
5.
6.
7.
NOTE
Perform steps 1 through 4 for diagonal connecting link (front dolly).
Perform steps 5 through 7 for each parallel alining rod.
Remove locknut (21), bolt (18), and washer (19) from front of connecting link (20). Discard Iocknut
Remove Iocknut (22), bolt (16), and connecting link (20) from bracket (2). Discard locknut.
Remove three bolts (4) and Iockwashers (3) and bracket (2) from mounting bracket(l). Discard Iockwashers.
Remove two rubber bushings (17) from connecting link (20).
Remove locknut (15), screw (10), washer (11), spacer (12), and washer (13) from front of alining rod (9).
Discard locknut.
Remove locknut (5), washer (6), and alining rod (9) from bolt (8). Discard Iocknut.
Remove two rubber bushings (14) and rubber bushing (7) from alining rod (9).
4-175
