TM 9-2330-275-14&P
4-63. REAR SUSPENSION BAR MAINTENANCE (M832 SN J089-001 THRU 159 AND J017-
160 THRU 350 ONLY) (Con’t).
9.
Starting on inboard side of either machine bolt (15), add fabricated spacer (18) and install locknut (13). Turn
locknut (13) against spacer (18) to pull machine bolt (15) through mounting bracket (16) and stabilizer (17).
Remove locknut (13) and add additional fabricated spacers (18) as necessary until machine bolt (15) is
completely removed from mounting bracket (16). Repeat for other side. Discard bolts and locknuts.
10.
Remove four tube spacers (21, 22, 24, and 25) and two flat washers (23) from each of two mounting
brackets (16).
11.
Remove suspension bar (1) from dolly.
12.
For each side, remove four resilient mounts (19) and sleeve bushings (20) from mounting bracket (16) and
remove resilient mount (19) and sleeve spacer (26) stabilizer (17). Discard resilient mounts, sleeve bushings,
and sleeve spacers.
4-163
