TM 9-2330-275-14&P
4-83. REAR SUSPENSION BAR MAINTENANCE (M832 SN J089-001 THRU 159 AND J017-
160 THRU 350 ONLY).
This Task Covers:
a. Removal
c.
Installation
b. Inspection
Initial Setup:
Equipment Conditions:
Front and rear dollies uncoupled (pars 2-11).
Reflectors removed (pare 4-72).
Data plates removed (pars 4-73).
Toolbox and platform removed (para 4-53).
Dolly set caster assemblies (M832 SN J069-001
thru 159 and J017-160 thru 350 only) removed,
if necessary (pars 2-10).
Materials/Parts:
Two locknuts
Eight cotter pins
Ten resilient mounts
Eight sleeve bushings
Two sleeve spacers
Two machine bolts
Four lockwashers
Eight tube spacers
Personnel required: Two
Tools/Test Equipment:
General mechanic’s tool kit
Common no. 1 shop set
Fabricated steel spacers (Appendix G)
NOTE
If suspension bar for this model requires caster mounts, see Appendix G for
rear suspension bar modification instructions.
2.
Remove two screws (6), Iockwashers (5), and wire rope assemblies (4) from suspension bar (1). Discard
lockwashers.
Remove two screws (3), Iockwashers (7), and wire rope assemblies (2) from suspension bar (1).
Iockwashers.
3
Discard
4-161
