TM 9-2330-275-14&P
4-63. REAR SUSPENSION BAR MAINTENANCE (M832 SN J089-001 THRU 159 AND J017-
160 THRU 350 ONLY) (Con’t).
b.
INSPECTION
Inspect suspension bar, flat washers, straight pins, and stabilizers for breaks, cracks, and bends. Replace
damaged hardware.
c.
INSTALLATION
1.
2.
3.
4.
For each side, install four new resilient mounts (19) with four new 1-5/16-in.-long sleeve bushings (20) in
mounting bracket (16).
For each side, install new resilient mount (19) with new sleeve spacer (26) in stabilizer (17).
Place suspension bar (1) on ground in proper position for reassembly.
Starting on inboard side of mounting bracket (16), install 2-3/4-in.-long tube spacer (25), flat washer (23),
7-1/8-in.-long tube spacer (24), flat washer (23), 1-5/16-in.-long tube spacer (22), and 2-5/16-in.-long
tube spacer (21) in mounting bracket (16).
4-164
