TM 9-2330-275-14&P
4-62. SUSPENSION BAR MAINTENANCE (EXCEPT M832 SN J089-001 THRU 159 AND
J017-160 THRU 350) (Con’t).
b.
INSPECTION AND REPAIR
1.
Inspect suspension bar for breaks, cracks, and bends.
2.
Weld cracked suspension bar in accordance with TB 9-2300-247-0 and TM 9-237.
c.
INSTALLATION
NOTE
Perform the following steps at each side of suspension bar.
1.
Install two rubber bushings (7) on bracket (10).
2.
Position suspension bar (1), spacer (9), and two washers (8) on bracket (10).
3.
Install spacer (6) on bolt (5) or threaded rod (2).
4.
Install bolt (5) or threaded rod (2) with washer (3) and new locknut (4) on suspension bar (1).
FOLLOW-ON TASKS:
Install distribution box (rear dolly only) (para 4-20 or 4-21).
install toolbox (rear dolly only) (pars 4-51 or 4-52).
Install air reservoir (front dolly only) (pars 4-43).
Connect alining rods (para 4-65).
Couple front and rear dollies (pars 2-19).
4-160
