TM 9-2330-275-14&P
4-61. SHOCK ABSORBER AND MOUNTING BRACKET REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic’s tool kit
Seven lockwashers
1.
2.
3.
4.
Remove nut (12), Iockwasher (11), and washer (10) from upper stud (8) or bolt (16). Discard lockwssher.
Remove nut (12), Iockwasher (11), and washer (10) from lower stud (14). Discard Iockwasher.
Remove shook absorber (13), sleeve (9), four robber bushings (7), and two washers (6) from upper and lower
studs (8 and 14) or bolts (16).
NOTE
Perform steps 4 through 6 only if mounting bracket is damaged.
Remove nut (1), Iockwasher (2), and lower stud (14) from bracket (15). Discard Iockwasher.
4-157
