TM 9-2330-275-14&P
4-58. STRUT MAINTENANCE (M832) (Con’t).
b.
DISASSEMBLY
1.
Remove locknut (14) and screw (8) and remove clamp assembly (13) from strut (12). Dim locknut
2.
Remove cotter pin (8), washer (1), and pin (7) from tube (2) and remove tube from strut (12). Discard cotter pin.
1.
Install tube (2) to strut (12) with pin (7), washer (1), and new cotter pin (6).
2.
Install clamp assembly (13) to strut (12) with screw (8) and new locknut (14).
d.
lNSTALLATION
1.
Position strut (12) assembly to dolly and install pin (5).
2.
Install two washers (3) and new cotter pins (4) to pin (5).
3.
Install pin (10) to lower end of strut (12).
4.
Install two washers (11) and new cotter pins (9) to pin (10).
5.
Tighten clamp assembly (13).
4-152
